LOST CREEK MACHINE, INC

Used Metal Lathes, Engine Lathes, 3 and 4 jaw chucks, face plates and collet chucks

 

Phone (815)434-5897 Fax (815)434-5898 Ottawa, Illinois

Click on the thumbnail for a larger photo.

The symbol mean it is new to this list but is still a used machine.

      

Return to Home

 

 

 

 

 3 Jaw Plain Back

 
Cushman 7-1/2" 3 Jaw Self-Centering Chuck w/ Plain Back, 1 Set of Jaws $125.00
Buck Forkardt 8-1/4" 3 Jaw Self Centering Adjust Tru Chuck, 3AT8, 43 Pounds $295.00
  DE Whiton 9-1/4" Independent & Self Centering 3 Jaw Chuck, Plain Back $245.00
Bison 9-7/8" Set Tru 3 Jaw Self-Centering Plain Back Chuck

$395.00
A5310P Bison 10" 3 Jaw Chuck w/ Reversible Top Jaws

$275.00

   

 3 Jaw Threaded Back 

 
Cushman 9" 3 Jaw Chuck w/ 2-3/8"-6TPI Spindle Mount, One of the 3 pinions is missing, Only comes w/ the small diameter jaws $149.00
HK30805-1053 Brand New Bison 10" 3 Jaw Self Centering Chuck w/ Reversible Top Jaws, 2-1/4"-8 TPI Spindle Thread $795.00
Bison 10" 3 Jaw Self Centering Chuck w/ Reversible Top Jaws, 2-1/4"-8 TPI Spindle Thread, 72 Pounds $349.00
Cushman 10" 3 Jaw Chuck w/ 2-7/8"-5 TPI Spindle Mount, Only 1 Set of Jaws, 65 Lbs. $175.00
Union 10-3/4" 3 Jaw Chuck with 2-3/8" 8TPI Spindle Thread, Came off of an old South Bend 16" Lathe, Pretty Sloppy, 48 Pounds $149.00
   

 3 Jaw D-1 Camlock

 
A538D3 Bison 8" 3 Jaw Self Centering Chuck w/ D1-3 Spindle Mount $225.00
Union 10" 3 Jaw Self Centering Chuck w/D1-6 Spindle Mount, 3 Pins, 66 Pounds $249.00
Bison 10" 3 Jaw Self Centering Chuck w/ Inside & Outside Jaws, D1-8 Spindle Mount, 80 Pounds

$299.00
A5310D8 Yuasa 10" 3 Jaw Self Centering Chuck w/ Reversible Top Jaws, D1-8 Mount (66 Pounds) $295.00
   

3 Jaw A Type

 
Rohm 9-3/4" A1-6 3 Jaw Self Centering Chuck, 73 Pounds $275.00
   

 3 Jaw Long Taper

 
A537L00

7-1/2" 3 Jaw Self Centering Lathe Chuck w/ L00 Long Taper Spindle Mount, Only has the small diameter jaws, Made In England

$249.00
Cushman 10" 3 Jaw Self-Centering Chuck w/ Reversible Top Jaws, L1 Long Taper Spindle Taper, 72 Pounds

$349.00
Bison 12-1/4" 3 Jaw Self Centering 3 Jaw Chuck, L1 Spindle Mount, 120 Pounds $595.00
Cushman 15" 3 Jaw Self Centering Chuck w/ L-2 Spindle Mount $395.00
   

Misc. 3 Jaw

 
Wescott Chuck Company 5" 3 Jaw Self Center Lathe Chuck w/ Sunnen Hone Arbor $295.00
rotary table chuck Dexter 4" 3 Jaw Self Centering Chuck Mount on 6" Round Plate for Rotary Table, Only 1 set of Jaws $75.00
   

4 Jaw Chucks

 
  Bison 3-3/8" Diameter 4 Jaw Independent Chuck, Plain Back, Made in Poland $149.00
Union Mfg 4" 4 Jaw Independent Lathe Chuck w/ 1" Straight Shank $95.00
Craftsman 4" 4 Jaw Independent Chuck, 1"-8TPI Spindle Thread $110.00
Union 4" No. 9404-H 4 Jaw Independent Chuck, Hardinge Taper Nose Spindle Mount, Largest Diameter Approximately 1.657" $99.00
  Union 4" 4 Jaw Independent Chuck w/ 1-7/8" - 14TPI Spindle $100.00
  Atlas 4" 4 Jaw Independent Lathe Chuck w/ 1"-8TPI Spindle Thread, NOS $195.00
  Atlas 4" Four Jaw Independent Chuck w/ 3/4"-16 TPI Spindle Thread, 101-21550 $125.00
4" 4 Jaw Independent Lathe Chuck w/ 1"-8 Spindle Thread $99.00
Skinner Chuck Co. 5" 4 Jaw Independent Chuck w/ 6-1/2" Diameter MT #4 Back Plate

$125.00

DE Whiton 6" 4 Jaw Independent Lathe Chuck, 1-1/2"-8 TPI Spindle Thread, New London, Conn. USA

$125.00

DE Whiton 7-1/2" 4 Jaw Independent and Self Centering Chuck, Plain Back $100.00
  8" 4 Jaw Chuck, NOS, Made in China $75.00
Craftsman 8" 4 Jaw Independent Chuck w/ 1-1/2"-8 TPI Spindle Thread $149.00
Buck 8" 4 Jaw Independent Chuck, 1-7/8" -10TPI Spindle Thread, Has a dent in the side of the body, No Crack, 24 Pounds $199.00
  BigSung 9-3/4" 4 Jaw Independent Chuck w/ Plain Back, Made In Taiwan $149.00
Bison 9-3/4" 4 Jaw Self Centering Chuck w/ Reversible Top Jaws, Plain Back, 60 Pounds $395.00
A5410P  10" 4 Jaw, Plain Back $149.00
Rohm 12" 4 Jaw Self Centering Chuck, Plain Back, 82 Pounds $295.00
Cushman 12" 4 Jaw Independent Chuck, Cast Body, 2-1/2"-6TPI Spindle Mount $249.00
  Cushman 12" 4 Jaw Independent, Plain Back $149.00
Horton 14" 4 Jaw Independent Chuck, Cast Body, 3" x 4-1/2" TPI Spindle Thread, 101 Pounds $149.00
sca 18" 4 jaw chuck   SCA 18" 4 Jaw Independent Lathe Chuck, Made In Sweden $295.00
18" Diameter 4 Jaw Independent Lathe Chuck w/ Key $295.00
   

4 Jaw D-1 Camlock

 
A548D3 The Skinner Chuck Company 8" 4 Jaw Independent, D1-3 Spindle Mount $249.00
A548D3A Cushman 8" 4 Jaw Independent, D1-3 Spindle Mount $249.00
The Skinner Chuck Company 8" 4 Jaw Independent, D1-3 Spindle Mount $249.00
Union 10" 4 Jaw Independent Chuck, D1-6, No pins, Takes pins with 5/8"-18TPI thread, 68 Pounds $149.00
A5414D8 Nobel 13-3/4" 4 Jaw Independent Lathe Chuck w/ D1-8 Spindle Mount, 3-5/16" Hole Through the Body, 113 Pounds $295.00
A5414D8a 13-3/4" 4 Jaw Independent Chuck w/ D1-8 Spindle Mount, 113 Pounds $295.00
16" 4 Jaw Independent Chuck w/ D1-11 Spindle Mount, 142 Pounds $395.00
22" 4 Jaw Independent Chuck w/ D1-8 (176 Pounds)

$349.00
   

4 Jaw Long Taper Mount

 
A5410L0 Sampson 10" 4 Jaw Independent Chuck, L0 Spindle Mount, 48 Pounds

$395.00
   

2 Jaw Power Chucks

 
  Pratt Burnerd 10" 2 Jaw Setrite Powerchuck, A2-6 Spindle Mount $299.00
   

6 Jaw Chucks

 
buck 6 jaw d4 Buck 6" 6 Jaw Chuck, w/ D-1/4" Mount, Only comes with one set of jaws $250.00
A568D6 Buck 8-1/4" Diameter 6 Jaw Adjust Tru Self Centering Chuck w/ D1-6 Spindle Mount, Only Has 3 hard Top Jaws, all 6 Master Jaws Included, 6 Previously Machined Soft Jaws Included

$495.00

A569D8 Buck 9" 6 Jaw Chuck, D1-8 Mount, Only one set of jaws, 62 Pounds $395.00
6 Jaw Chuck Jaws 2.930" Overall Length, 2.215" Overall Height, Marked 2017 $149.00
   

Collet Chucks

 
K4331

Dunham Plain Back Air Chuck 5-C Collet, A special air union permits spindle speeds to 3,500 rpm (not included $184), designed for secondary chucking, not for through work, 9 Pounds

$195.00
Hardinge Sjogren 22J  Collet w/ Plain Back, Hex 1.427" Collet $195.00
  Lever Type Collet Chuck w/ 2-1/4"-8 Spindle Thread & No. 21 Collets $249.00
K4505 Pratt Burnerd Lever Type Collet Chuck,    D1-6 Mount & EE Collets, #6(1/2-5/8"), 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 19(2-1/8"-2-1/4", Made In England, $995.00
K4505A Pratt Burnerd Manual Collet Chuck, Key Operated, KC20 Chuck Size, Takes ED Collets, D6 Spindle Mount, Comes with 1/4-3/8", 3/8"-1/2, 3/4-7/8", 1-3/8-1-1/2",         1-5/8-1-3/4" Collets $995.00
burnerd collet chuck l00 Pratt Burner Lever Type Collet Chuck, L00 Spindle Mount, EC Collets 1/16"-1-1/2"
$595.00
K4505B Pratt Burnerd Manual Collet Chuck, L0 Mount, EC Collets 1/16"-1-1/2" $995.00
  Jacobs No. 5 Collet Chuck w/ 500 Series Rubber Flex Collets, 1-1/2"-8TPI Spindle Thread $395.00
Jacobs Flex Collet Chuck & No Rubber Flex Collets Included, D1-6 Spindle Mount $199.00
Jacobs Rubber Flex Collet Chuck w/ American Standard A1-6 Spindle Mount, Model # 91-A6, No Collets $195.00
K4573A Jacobs Rubber Flex Collet Chuck w/ American Standard A1-6 Spindle Mount, Model # 91-A6, 1/16" - 1" $395.00
jacobs flex d3 K4573 Jacobs Flex Collet Chuck & Rubber Flex Collets, D1-3 Spindle Mount, 1/16" to 1-3/8"

$395.00
K4573L1 Jacobs Flex Collet Chuck & Collets, L1 Spindle Mount, (10) Piece Collet Set 1/16"-1-1/4" $395.00
jacobs flex collet chuck l1 K4573L Jacobs Flex Collet Chuck w/ No Collets, Model 96-T1, L1 Mount
$249.00
  Armor Lever Type Collet Collet Chuck, 1-1/2"-8 TPI Spindle Thread w/ Collets 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 17/32, 9/16, 5/8, 11/16, 23/32, 3/4 $225.00
   

Collet Closers

 
  Handwheel Drawbar Collet Closer for 3C Collets, 3/4" Diameter TubeSouth Bend 9" $69.00
  Lever Type 5C Collet Closer, 1.360" Diameter Tube, 15" Long Tube, I don't know what this fits.

$249.00

Lever Type 5C Collet Closer, 1.350" Diameter Tube, This came off of a Hardinge Lathe but I do not know what model.  The lathe had a 5-C Spindle so it didn't need and adapter  The drive bushing fits over an 1-13/16" Spindle, 12 Pounds $275.00
   

Spindle Thread Protectors

 
2-1/4"-8 Spindle Thread Protector $40.00
   

Face Plates & Back Plates

 
5" Drive Plate w/ 1-1/2"-8TPI Spindle Thread $20.00
Atlas 6" Face Plate w/ 1-1/2"-8 Spindle Thread, Casting #9-15 $45.00
6-3/16" Back Plate, 2-1/4"-TPI Spindle Thread $49.00
7-3/8" Face Plate w/ 1-1/2"-8TPI $95.00
   7-1/2" Face Plate w/ 39MM x 4 Spindle Thread $50.00
8" Back Plate, 2-1/4"-8 Spindle Threads $75.00
Authentic South Bend 8-1/2" Face Plate w/ 1-1/2"- 8 TPI Spindle Thread, TFP-100N, 5/16"-18 Bolt Holes $149.00
A 8-1/2" Face Plate w/ 2-1/4"- 8TPI Spindle Thread $95.00
B 8-1/2" Face Plate w/ 2-1/4"- 8TPI Spindle Thread $95.00
D 8-1/2" Face Plate w/ 2-1/4"- 8TPI Spindle Thread $95.00
  8" Faceplate w/ 3/4"-16 mount $65.00
10" Back Plate 1-1/2"-8 Spindle Thread $95.00
12" Face Plate 2-1/4"-6 TPI Spindle Thread $149.00
Photo 15-3/4" Faceplate 2-1/2-8TPI

$100.00

  16-3/4" Face Plate, 2-11/16" 6TPI Spindle $100.00
   

Camlock Face Plates

 
  7-1/2" D1-6 Drive/Back Plate w/ 3 Pins $75.00
7-1/2" Drive Plate w/ D1-4 Mount $75.00
10" Face Plate w/ D1-4 Mount, 13 Pounds $95.00
  10" Drive Plate, D1-6 Mount, 2 Pins $75.00
A5711D4 11" Faceplate w/ D1-4 Camlock Spindle Mount $125.00

11" D1-8 Drive Plate

$95.00
A5711D4NP 11" Faceplate w/ D1-4 Camlock Spindle Mount(no pins) $49.95
12" Face Plate w/ D1-4 Spindle Mount, Casting # C565-0444 $149.00
12" Back Plate w/D1-11 Spindle Mount $125.00
12-1/2" Face Plate D1-4 Spindle Mount $125.00
A5714D6 14" Faceplate, D1-6 Spindle Mount $149.00
A5715D6 15" Faceplate w/ D1-6 Spindle Mount, Very Heavy Duty $175.00
 Photo  19 5/8" Face Plate for D1-6 Spindle

$295.00

   

Long Taper Face Plates

 
Bison 8" Set Tru Back Plate L1 Spindle Mount $75.00
8" L00 Drive Plate $99.00
8" L00 Drive Plate
(A)8" L00 Drive Plate $89.00
9" L2 Back Plate $100.00
10" L00 Face Plate $175.00
10-3/4" Drive Plate w/ L2 Mount $149.00
13" L2 Face Plate $149.00
A5714L00b 14.140" Faceplate w/ L00 Spindle Mount $129.00
A5714L00 14" Faceplate w/ L00 Spindle Mount $159.00
14-1/2" L0 Face Plate $149.00
18" Face Plate, L0 Spindle Mount $195.00
   

A-Type Face Plates

 
9-7/8" A1-6 Back Plate $75.00
   

Steady Rests & Follower Rests

 
A51010 Atlas 10" Steady Rest $149.00
A51010a Atlas 10" Steady Rest $125.00
BE5010AS Telescoping Steady Rest for 10" Atlas Steady Rest, NOS, Made In China $195.00
  Import Follower Rest $75.00
  Import Follower Rest $95.00
  Import Follower Rest $95.00
  Follower Rest $125.00
  Larger Follower Rest $175.00
South Bend 14-1/2" Telescoping Steady Rest

$449.00
  17" Steady Rest, Monarch, Leblond, American???

$295.00

  18" Shop Made Steady Rest, 13" Hole $149.00
  22" Steady Rest w/ 12" Through Hole, The base has been modified $149.00
 Photo Steady Rest for 22" Lathe $125.00
  Steady Rest for 22" Lathe $295.00
  23" Steady Rest, 7-1/2" Hole, Manufacturer??? $295.00
 Photo  Steady Rest for 26" Lathe $175.00
  24" Heavy Duty Steady Rest   $395.00

Prices are each.

 

Call (815)434-5897 or E-mail sales@lostcreekmachine.com

 

View This Page In Frames or return Home

Thank You for visiting Lost Creek Machine