Used Metal Lathes, Lathe Parts, Lathe Tooling
Phone (815)434-5897
Ottawa, Illinois
Click on the thumbnail for a larger photo.
The 
symbol mean it is new to this list but is still a used
machine.
New Lathes Used Lathes
| Metal Lathes |
List |
||
 |
A03236  |
Clausing Colchester 17" x 80" Gap Bed Gear Head Metal Lathe, 15" 3 Jaw & 16" 4
Jaw Chuck, 25" Face Plate, 400 Series Quick Change Tool Post, Steady Rest, L-2
Long Taper Spindle Mount, 3" Spindle Hole, 26 to 900 RPM Spindle Speeds, 5 Morse
Taper Tailstock Taper
 |
$3,995.00 |
  |
A03228 |
Clausing Colchester 15" x 48" Gear Head Lathe w/ 5C Collet Closer, Thread Dial,
Phase II Quick Change Tool Post & Follower Rest, Sony Digital Readout(X-Axis not
working), L-1 Spindle Mount, 2" Spindle Hole, Morse Taper #4 Tailstock Taper,
Spindle Speeds 37-1,500 RPM, 2 Speed 3 Phase 220 Volt Motor
 |
$3,995.00 |
  |
 A0394 |
Clausing 14" x 42" Variable Speed Turret Lathe, Model 6913, 9" 3 Jaw, 8" 4 Jaw,
8" Faceplate, Taper Attachment, L00 Spindle
Taper, 1-3/8" Spindle Hole, 1-1/2" Tailstock Bore, 3 HP 3 Phase 220/440 Volts    |
$3,995.00 |
 |
A0395 |
Clausing 14" x 48" Variable Speed Lathe, Bison 10" 3 Jaw Chuck, Steady Rest,
Aloris BXA, Carriage Stop, Trav-A-Dial, Quick Change Tool Post, Model 1501, 3
Phase 220 Volts, D1-4 Spindle Morse Taper #4 Tailstock Taper
 |
$3,495.00 |
 |
A04194  |
Leblond 15" x 54" Servo Shift Lathe w/ Taper Attachment, 3 Jaw Chuck, Micrometer
Carriage Stop, L-0 Spindle Taper, 1-1/2 Spindle Hole, Serial #6C1041(August 16,
1967)
 |
|
 |
A0635 |
Hardinge Precision Lathe Model DSM 59, 3 Jaw Chuck, 5C Collet Closer Morse Taper
#2 Tailstock, 2 HP 3 Phase 220/440 Volt Motor
 |
$1,495.00 |
 |
A07188  |
Sheldon 10" x 36" Metal Lathe
Rocker Tool Post, Tool Holder, 5-C Collet Closer, 2-1/4" -8TPI Spindle Thread,
1-3/8" Spindle Hole, Morse Taper #2 Tailstock, Model EXL-56-B, 3 Phase 220 Volts
 |
$1,795.00 |
 |
A071891 | Sheldon 12" x 36" Metal Lathe, Catalog No. T-12-36, Quick Change Gear Box, 3 & 4 Jaw Chuck, Tool Post Tool Holders, Headstock Center Adapter, 2-1/4"-8 Spindle Thread, 1-3/8" Spindle Hole, 1 HP 3 Phase 220 Volts | $2,495.00 |
 |
 A07193 |
Sheldon 15" x 32" Gear Head Metal Lathe, Model GR-60-P, 1-1/2" Spindle Holde, 3
Morse Taper Tailstock 3 HP 3 Phase 208-220/440 Volts 
 |
$2,795.00 |
 |
A0725 | Sheldon 15" Turret Lathe |
$2,495.00
|
 |
A08264 |
South Bend Nordic 15" x 36" Gear Head Lathe, 10" 3 & 14" 4 Jaw Chuck, Taper
Attachment, Steady Rest 6" Capacity Trav-A-Dial, Rocker Type Tool Post w/ Tool
Holders
 |
$3,995.00 |
 |
A08266 | South Bend 16" x 32" Model 400(For Parts) | Call for prices on parts |
 |
A08267 |
South Bend 16" x 81" Lathe w/ Taper Attachment, 3 & 4 Jaw Chuck, Face Plate,
Quick Change Tool Post, Steady Rest
 |
$3,295.00 |
 |
A09021 |
Enco 12" x 36" Belt Drive Lathe Model 92030, 3 & 4 Jaw Chuck, Face Plate, 4 Way
Tool Post, Steady Rest, 1-7/16" Spindle Hole, Morse Taper #2 Tailstock, (12)
Speeds 80-1250 RPM, 1 HP 1 Phase 110/220 Volts
 |
Sold |
 |
A10011 | Rockwell 10" x 36" Variable Speed Metal Lathe, Cat No 25-700, 5" 3 Jaw Self Centering Chuck, 1-1/2"-8TPI Spindle Thread, Morse Taper #2 Tailstock, 3/4 HP 1 Phase 115/230 Volts | Parts |
 |
A1902 |
Rathbone Chucker Style Lathe, Approximate 10" Swing, 11" from end of spindle to
turret, 2 HP 1 Phase 220 Volts, 2-3/16"-10TPI Spindle Thread, 5-C Collet closer
Variable Speed, Power feed on X-Axis
 |
$995.00 |
 |
A1906 | VDF 20" x 60" Gear Head Engine Lathe, 12" 3 Jaw Chuck, Quick Change Tool Post Set, Carriage Stop, Shop Made 8" Steady Rest, 18 Speeds 18-900 RPM, 2-7/16" Spindle Hole, 5 MT Tailstock, Inch/Metric Threading, 7.5 KW(10 HP) 3 Phase 220 Volts,.Made In Germany |
$4,495.00 |
 |
A3210 | Emco Maximat V10-P Lathe w/ Vertical Milling Machine Head, 1 Phase 115 Volts | $3,995.00 |
 |
A03255 | Emco Compact 5 Lathe w/ Vertical Milling Machine Head on Wood Cabinet, 1 Phase 115 Volts | $1,595.00 |
 |
A2101 |
Taylor 17" x 20" Metal Spinning Lathe w/ Tooling, Spindle 1"-8TPI, Morse Taper #3 Tailstock Center, 1-1/2 HP 3 Phase 230/460 Volt Motor w/ Teco 1 Phase Varbiable Speed Drive, Made in England, 1,100 Pounds |
$2,495.00 |
 |
 |
Metal Spinning Bowl Die 6" Diameter, 3-3/16" Depth, 1"-8TPI Spindle Thread, 19
Pounds |
$95.00 |
 |
 |
Metal Spinning Bowl Die 8-1/2" Diameter, 4-3/8" Depth, 1"-8TPI Spindle Thread,
19 Pounds |
$125.00 |
|
CNC Lathe |
|||
 |
Setco M Series Machined Dovetail Cross-Slide, 4" Saddle Width, 6" Saddle Length, Slide Travel 3-3/4" |
$175.00 |
|
 |
A5901 |
Atlas 10/12" Milling Attachment |
$275.00 |
 |
A5901a |
Atlas 10/12" Milling Attachment |
$275.00 |
 |
A59011 | Atlas 6" Milling Attachment |
$295.00 |
 |
A59021 |
Palmgren No. 400 Milling Attachment, 12"-16" Swing Lathes 33 Pounds | $295.00 |
 |
A5904
|
Dumore Milling Attachment For Metal Lathe |
$350.00 |
 |
A59095 |
Holdridge 12-D Radius Tool Set, 0-12" Concave & Convex Diameter, For 15" and
Larger Lathes, 115 Pounds, 126 Pounds |
$1,195.00 |
|
For more collets see Collets and Closers |
|||
| Carbide Lathe Tooling | |||
 |
 |
Kennametal Top Notch Carbide Turning Tool w/ Inserts, Shank .975" W x .845" H, KC810 4R Threading Inserts | $69.00 |
 |
 |
Kennametal Carbide Turning Tool Holder, .825" x 1" Wide, NELL-161C INS NP-13 w/ (11) Top Notch NPL 131 KC850 Profile Inserts | $79.00 |
 |
 |
Kennametal 1" x 9" Boring Bar 5188-2672 B-1108 w/ 20 VR Wesson TPG 321 Carbide Inserts | $95.00 |
|
Toolposts and Other Lathe Tooling |
|||
 |
Aloris CXA Piston Type Tool Post | $125.00 | |
 |
Shop Made CXA-5 Morse Taper #3 Tool Holder | $35.00 | |
 |
Alois CXA-5 Morse Taper #3 Tool Holder | $75.00 | |
 |
Aloris CXA-8 Threading Tool Holder |
$69.00 |
|
 |
Aloris CXA-16 Carbide Turning/Facing Holder | $125.00 | |
 |
Aloris CA-7 Parting Tool Cut Off Toolholder, 7/8" Blades, 4 Pounds |
$85.00 |
|
|
|
Soleau Tool Post for Hardinge Lathe, Made in Fairfield NJ, 1-1/2" OAL |
$49.00 |
|
 |
 |
Aloris BXA-1 Indexable Quick Change Tool Post w/ (2) Aloris BXA1-1 Turning & Facing
Holders, No Name Boring Bar Holder, No Name Indexable Insert holder
 |
$495.00 |
 |
Aloris BX Piston Type Quick Change Tool Post, 10-15" Lathe |
$149.00 |
|
 |
Phase II Series 100 Piston Type Quick Change Tool Post Set, #1, #2, #4, #7, & #10 Holders | $125.00 | |
 |
Phase II Series 200 Piston Type Quick Change Tool Post Set, 3 Turning Facing, 2 Turning Facing Boring Holders & Parting Tool Holder | Sold | |
 |
 |
Aloris CA Tool Post 14"-20 Swing Lathe, 21 Pounds |
$149.00 |
 |
 |
Aloris CA Tool Post, Aloris CA-6 Mutliple Tool Holder, CA-7 Parting Tool Holder, Enco 1-1/4" Boring Bar Holder, 45 Pounds |
$395.00 |
 |
 |
Dorian SD40CA Quick Change Tool Post, For Lathes w/ 16" to 20" Swing, 20 Pounds | $249.00 |
 |
 |
Aloris DA Quick Change Tool Post w/ Dorian Turning & Facing Tool Holder
D50-DA-1-150, 1-1/2"
|
$595.00 |
 |
 |
Dorian D50DA Quick Change Tool Post Set, 17"-32" Swing Lathe, Comes with a #1 tool holder, (2) #2 Holders, #4 Boring Bar Holder, #41 Large Boring Bar Holder, 3R Holder |
$795.00 |
 |
 |
Enco 60D Knurling, Turning Quick Changle Tool Holder |
$59.00 |
 |
 |
Repeater Quick Change Tool Post w/ 7 Holder, Height of Tool Post 1-3/4",
Resembles KDK Tool Posts
 |
$295.00 |
 |
 |
Mecanizados Huesca MH90 Quick Change Tool Post w/ 4 Holders |
$295.00 |
 |
 |
Mecanizados Huesca MH90 Quick Change Tool Post w/ 8 Holders, 27 Pounds
 |
$395.00 |
 |
|
"Boni" Suisse Feldbach Type 125 Quick Change Tool Post w/ 4 Turning Tool Holders and a Boring Bar Holder, Made in Switzerland |
$395.00 |
 |
Sheldon 12" Lathe Telescoping Taper Attachment, Cross Feed Screw 1/2"8TPI Left Hand Acme Thread, Main Castings are stamped TT, Came off of a Model No. T-12-36 | $995.00 | |
 |
South Bend 14-1/2", 16, 16-24" Lathe Thread Stop |
$49.00 |
|
 |
 |
South Bend 14-1/2", 16, 16-24" Lathe Micrometer Carriage Stop |
$225.00 |
 |
B | South Bend 14-1/2", 16, 16-24" Lathe Micrometer Carriage Stop |
$225.00 |
 |
 |
Micrometer Carriage Stop For Lathe |
$75.00 |
 |
 |
Unknown Carriage Stop, Estimated to fit 12"-16" Lathe |
$49.00 |
 |
Armstrong 1" Lathe Dog, 89-304 | $10.00 | |
 |
3/8" & 3/4" Straight Tail Lathe Dogs |
$15.00 |
|
 |
4 Pound Lot of Lathe Cutting Tools, Mostly HSS, Various Sizes 3/16" to 7/16" | $40.00 | |
 |
Armstrong Ace No. 6675 Cut-Off Tool For Atlas 6" Lathe, 5/16" x 1/2" Shank, NOS, Made in USA, 2 Available |
$39.00 Ea |
|
 |
Craftsman No. 2035 LH Turning Tool Holder, 3/8" x 5/8" |
$25.00
|
|
 |
 |
Armstrong Ace 2010R HSS Turning Tool Holder, 3/8" x 3/4", 1/4" Bits | $19.00 |
 |
Craftsman No. 9-2198 Threading Tool Holder | $75.00 | |
 |
Craftsman No. 2031 Threading Tool Holder, 5/16" x 3/4" Shank |
$49.00 |
|
 |
Williams Homecraft No C-50H, Shank 3/8 x 3/4" |
$49.00 |
|
 |
 |
Williams & Armstrong #51 Threading Tool Holders, All Williams except the Brown one is an Armstrong, 1/2" x 1-1/8" Shank | $39.00 |
 |
Armstrong Threading Tool Holder Bit, NOS, No. 8151, 2 Available | $49.00 ea. | |
 |
Armstrong No. 9 Boring Bar Holder w/ Boring Bar, 1/2" x 1-1/8" Shank | $20.00 | |
 |
 |
Williams TH-9 Boring Bar Holders w/ Boring Bar, 1/2" x 1-1/8" Shank, 5 Available | $25.00 Ea. |
 |
Williams Carbide Turning Tool Holder TH1-0-L, LH Shank 3/8" x 15/16" w/ Wrench, 1/4" Bits, NOS (2 Available) |
$29.00 Ea. |
|
 |
Williams HSS Turning Tool Holder TH-0-L, LH Shank 3/8" x 7/8" w/ Wrench, 1/4" Bits, NOS (3 Available) |
$25.00Ea
|
|
 |
 |
Armstong 0K Knurling Tool, 3/8" x 7/8" High |
$40.00 |
 |
Williams No. 2040 Homecraft Knurling Tool Holder, 3/8" x 3/4" Shank |
$39.00 |
|
 |
Williams No. 1 Homecraft Lathe Turning Tool Set, Boring Bar Holder, Threading Tool, R,L,S HSS Turning Tool Holders, R,L,S Cut Off Blade Holders, Knurling Tool, Shank 1/2" x 1-3/16" , 20 Ponds |
$395.00 |
|
 |
Williams No 1-K Knurling Tool 1/2" x 1-1/8" |
$39.00 |
|
 |
A | Williams No 1-K Knurling Tool 1/2" x 1-1/8" |
$39.00 |
 |
Williams No. 2-K Knurling Tool 5/8" x 1-3/8" |
$39.00 |
|
 |
(5)Armstrong 1/2" Diameter Knurling Wheels |
$25.00 |
|
 |
South Bend 14-1/2", 16, 16/24" Rocker Type Tool Post, Holder Slot 11/16", Diameter of Post 1-1/2", T Nut 1/2" x 1-1/2" |
$45.00 |
|
 |
Rocker Type Tool Post for Approximately 16-18" Lathe, Diameter of Post 1.770", Tool Holder Slot 1", T- Nut .480" x 1.600" |
$45.00 |
|
 |
Enco 6" Four Way Tool Post, Missing T-Nut & Bolt |
$95.00 |
|
 |
1/4" x 3" Indexable Carbide Boring Bar |
$15.00 |
|
 |
Micobore 100 Zinc Coated Carbide Tipped 3/4" Boring Bar, OAL 9" |
$20.00 |
|
 |
A | Boring Bar Tool Post, 1/2", 3/4", 1" Boring Bars, Appears Unused | $75.00 |
 |
Armstong Bros. Tooling Co. 3-1/8" Diameter Boring Bar Tool Post No. 1-B, Takes 1/2", 3/4", 1" Boring Bars |
$75.00 |
|
 |
Boring Bar Tool Post, 4-3/8" Diameter, 4-1/4" Height, 4 Tee Nut .570 x 2.520", 16 Pounds |
$75.00 |
|
 |
 |
KO Lee Expanding Mandrel Set, Some of the collets have been stretched
 |
Sold |
|
Lathe Centers |
|||
 |
5 Morse Taper Headstock Adapter to Morse Taper #3 with Dead Center | $49.00 | |
 |
Morse Taper #3 Live Center, Made in the USA | $40.00 | |
 |
Morse Taper #3 Live Center, Made in the USA | $40.00 | |
 |
Morse Taper #3 Live Center w/ Interchangeable Tips | $69.00 | |
 |
Morse Taper #2 Interchangeable Tip Live Center | $79.00 | |
 |
 |
The Ready Tool Co. Morse Taper #3 Live Center | $39.00 |
 |
Motor Tool Detroit EL-400 Morse Taper #4 Live Center | $85.00 | |
 |
 |
Collis Morse Taper #5 Live Center, 3-3/4" Diameter, 13 Pounds |
$149.00 |
 |
Warner & Swaysey Turret Lathe Floating Tap Holder, 1-3/4" Shank,M-4385 |
$25.00 |
|
|
Turret Lathe Tooling |
|||
 |
B | Boyar Schultz 2RT Carbide Box Turning Tool w / 1" Shank | $99.00 |
 |
Metric Turret Lathe Knurling, 20MM Shank, Opens 1-5/16" | $49.00 |
|
|
Thread Dials |
|||
 |
 |
South Bend Heavy 10L Thread Dial, NOS
|
$275.00 |
|
Other Lathe Parts |
|||
| Click Here for Lathe Parts | |||
| We have hundreds of other parts not listed here. Please call with inquiries | |||
 |
Logan Lathe Quick Change Gear Box Thread Chart, No Model Stamped, NOS, Several Available |
$20.00 ea |
|
 |
Rockford Economy 16" Metal Lathe Parts, Tailstock, Compound, Gears, Handles, Click Thumbnail for pictures and prices |
|
|
 |
Lodge & Shipley 14" Metal Lathe Saddle clamp |
$49.00 |
|
 |
Rockwell 14" Lathe Cross Slide |
$75.00 |
|
 |
 |
Logan Lathe Cast Iron Motor/Drive Pedestal |
$95.00 |
 |
Logan Powermatic 14" Back Gear |
$295.00 |
|
 |
 |
Atlas 12" Metal Lathe Head Stock |
$395.00 |
 |
 |
Quick Change Gear Box, Came from a company that was doing retrofits for Atlas Lathes |
$49.00 |
 |
Rockwell 10"x 36" Metal Lathe Leadscrew, 54" Overall Length, 3/4" Diameter 8TPI, From Model 25-700 |
$125.00 |
|
| Atlas Change Gear Cover |
$150.00 |
||
 |
Atlas Change Shear Shield Door Bracket, Clamp 9-95A |
$39.00 |
|
 |
Atlas 12" Gear Change Metal Lathe Back Gears |
$229.00 |
|
 |
10-243 Large Atlas Back Gear (NOS)
|
$29.99 |
|
 |
10-241/256 Atlas Spindle Back Gear with Locking Pin (NOS) |
$250.00 |
|
 |
9-44 Atlas Threading Dial Gear (NOS) |
$50.00 |
|
 |
Cast Iron Leg Lathe Bench, 11" x 64" Wood Top |
$349.00 |
|
 |
 |
Rockwell Lathe Cabinet Stand On Wheels, 16" x 52" x 34"High, From Model 25-700 |
$100.00 |
|
New Parts for South Bend Lathes |
|||
 |
BE509SC | New Saddle Clamp for South Bend 9"/10K Metal Lathe |
$29.00 |
| BE503C | 3C Collet Closer For Logan 10" Lathe |
$120.00 |
Prices are each.
Call (815)434-5897 or E-mail sales@lostcreekmachine.com
Thank You for visiting Lost Creek Machine, Inc.
