Phone (815)434-5897 Fax (815)434-5898 Ottawa, Illinois
Click on the thumbnail for a larger photo.
The 
symbol mean it is new to this list but is still a used
machine.
|
|
|||
 |
Mitutoyo 0-5" Micrometer Standards w/ Wood Box |
$69.00 |
|
 |
Micrometer Standard Calibration Stand, 0-6" |
$249.00 |
|
 |
Brown & Sharpe 0-1" Micrometer, .001", No. 215 | $25.00 | |
 |
Starrett 0-1" Micrometer, .0001", No. 230 | $35.00 | |
 |
 |
Mitutoyo 25 to 50 MM x .001MM Digimatic Micrometer, No. 293-231 | $99.00 |
 |
 |
Mitutoyo 50 to 75 MM x .001MM Digimatic Micrometer 293-232 | $120.00 |
 |
Mitutoyo 0-1" Disc
Micrometer, .001" Res. |
$49.00 | |
 |
 |
Starrett 0-2" Inspectors Micrometer/Caliper Gage Click for Info | $149.00 |
 |
Starrett 2"-3" Mircrometer x .001", No. 436 | $49.00 | |
 |
Starrett 4"-5" Mircrometer x .001", No. 436 | $59.00 | |
 |
Starrett 5"-6" Mircrometer x .001", No. 436 | $69.00 | |
 |
0-1" Import Anvil Micrometer |
$29.00 |
|
 |
Scherr Tumico 1-2" Disc
Micrometer w/ Ratcheting Thimble, .001" |
$25.00 | |
 |
Polish 0-1" Micrometer, .0001" |
$15.00 |
|
 |
Federal 0-1" Indication Micrometer, Model 200P-1, .0001 |
$35.00 |
|
 |
Fowler 0-1" Electronic Micrometer |
$65.00 |
|
 |
Fowler 1-2" Digital
Micrometer, .0001", Made In China, NOS |
$39.00 | |
 |
 |
Mixed Micrometer Set
0-3", Starrett #230 0-1" x .001, Starrett No 2 1-2" x .0001, Brown & Sharpe
30-11 2-3" x .0001 |
$175.00 |
 |
 |
Starrett 4-5" Blade
Micrometer, .001" Resolution, 486-5 |
$149.00 |
 |
 |
0-6" Micrometer Set,
.0001, Carbide Face, Made in Poland, 2,3,4,5" Standards
 |
$195.00 |
 |
 |
Fowler 0-6" Digital
Mechanical Micrometer Set, .0001 Resolution, Made in China, Like New  |
$149.00 |
 |
Procheck 7-8" Micrometer, .0001", Made In China |
$29.00 |
|
 |
Simonds 9-10" Micrometer, Carbide Face, Ratchet Thimble, Made In England |
$75.00 |
|
| Brown & Sharpe 6-12" Micrometer
but it only comes with the anvil for 7-8" |
$9.95 |
||
 |
16"-20" Micrometer Set, Tubular Frame, Made In China |
$99.00 |
|
 |
Lufkin Micrometer Ball Attachment |
$4.95 |
|
 |
Tumico 6-9" Micrometer Set |
$95.00 |
|
 |
L841621 |
Mitutoyo 20"-24" Interchangeable Anvil Micrometer Set w/ Standards, .001"
Graduations, Ratchet Thimble, Made In Japan, NOS
|
$495.00 |
 |
L841621a |
Mitutoyo 20"-24" Interchangeable Anvil Micrometer Set w/ Standards, .001"
Graduations, Ratchet Thimble, Made In Japan, Very Little Use
|
$449.00 |
 |
 |
Mitutoyo 29"-30 Micrometer, No Standard
|
$95.00 |
 |
L841636 |
Mitutoyo 36"-42" Interchangeable Anvil Micrometer Set w/ Standards, .001"
Graduations, Ratchet Thimble, Made In Japan, Very Little Use
|
$695.00 |
 |
International Tool Company 2-6" Inside Micrometer, San Leandro,CA |
$25.00 |
|
 |
Mitutoyo 7"-8" Inside Micrometer x.001", Made In Japan | $75.00 | |
 |
Starrett Inside Micrometer Set No.823 | $95.00 | |
 |
 |
Tubular Micrometer Company Tumico Inside Micrometer | $49.00 |
 |
 |
Mityoto Micrometer
Head 0-1" x .0001", No 152-392 |
$95.00 |
 |
Starrett No. 237 Steel Rule Depth Gage, 6" Rule |
$20.00 |
|
 |
Central Tools 0-3" Depth Micrometer, Cranston RI USA |
$39.00 |
|
 |
Starrett 0-6" Depth Micrometer No. 445 | ||
 |
0-6" Depth Micrometer Set, 2-1/2" Base, .001" Resolution | $39.00 | |
|
|
|||
 |
Southwester Industries Trav-A-Dial |
$195.00 | |
 |
SPI Milling Machine Head Tramming Indicators | Sold | |
 |
Federal Dial Indicator, 1/4" Lug Hole on Back, .050 Range, .0005 Resolution, A3Q | $35.00 | |
 |
 |
Federal Plain Back Dial Indicator, Range .100 x .001 A6Q |
$29.00 |
 |
 |
Federal WC-81 Dial Indicator, 0-1/4" x .001 | $25.00 |
 |
 |
Federal C71 Dial Indicator, .125" x .0005", 2" Diameter Face, w/ 2 Back Plates |
$25.00 |
 |
Federal .125" Large Dial Indicator, .0005" Resolution, 3-1/2" Face |
$49.00 |
|
 |
Mitutoyo 0-1/4" Dial Indicator, .001" Resolution, 2411-08 |
$19.00 |
|
 |
 |
Carl Mahr Metric Dial Indicator.01-10MM, Made In Germany |
$19.00 |
 |
 |
Starret No. 25-145 Dial Indicator 0.125" x .001"
|
$59.00 |
 |
 |
Brown & Sharpe 0-1" Dial Indicator x .001", 8241-931-1 | Sold |
 |
 |
Teclock 0-1" Dial Indicator A1-921, Made In Taiwan (2 Available) |
$15.00 |
 |
Teclock 0-1" Dial Indicator A1-921, Made In Japan |
$25.00 | |
 |
Ames 0-1" Thickness Indicator Gage, .001" Graduations, Made in USA |
$75.00 |
|
 |
 |
Brown & Sharpe Best Test Dial Indicator, 7030-5, .0005", Swiss Made w/ Indicator
Holder |
$49.00 |
 |
 |
Mitutoyo Dial Test Indicator, .0005" Inch/ .01 MM, 513-206, Made in Japan |
$49.00 |
 |
 |
Federal Dial Test Indicator, .050" x .0005, T-11 |
$39.00 |
 |
Ideal Dial Test Indicator | $25.00 | |
|
|
Gladwin Dial Test Indicator |
$25.00 |
|
 |
Lufkin Dial Test Indicator No. 199A |
$35.00 |
|
 |
Mitutoyo Back Plunger Dial Indicator Kit, .100" x .001, 950-156 |
$99.00 |
|
 |
 |
Brown & Sharpe Magnicator Mag Base Indicator |
$29.00 |
 |
Starrett No. 657 Magnetic Base | $49.00 | |
 |
Starrett No. 657 Magnetic Base with 657F Swivel Base Indicator Holder | $75.00 | |
 |
Starrett No. 657F Swivel Base Indicator Holder | $25.00 | |
 |
 |
Starrett No. 659 Heavy Duty Magnetic Base Indicator Holder & 25-131 Dial
Indicator, .125" Range .0005" Resolution |
$295.00 |
 |
 |
Starrett No. 659 Heavy Duty Magnetic Base Indicator Holder |
$149.00 |
 |
Gem Double Side No. 250 Indicator Set, .001", Made in the USA | $95.00 | |
 |
Starrett Indicator Set, .200" x 0.001" in Wood Case |
$49.00 | |
 |
StarA | Starrett Dial Indicator Holder Set |
$75.00 |
 |
 |
Starrett Dial Indicator Holder Set |
$85.00 |
 |
L81196 |
Starrett Dial Test Indicator Set, .001", 196A1Z EDP 50697, (A is available)
B, C &
D has been sold |
$95.00 ea. |
 |
Star B | Starrett Dial Indicator Set, .001" |
$75.00 |
 |
Star E |
Starrett Dial Indicator Set, .001" | $95.00 |
 |
Brown & Sharpe 744A Magnetic Base Stand and USA Made Dial Indicator .002" x .0001" |
$59.00 |
|
|
Surface Plates |
|||
 |
Granite Check Stand 6" x 6" x 2" Thick | $35.00 | |
 |
 |
Cast Iron Surface Plate, 11-3/4" x 15-1/2" x 2.450"High, 46 Pounds |
$75.00 |
 |
L7104402 | Granite Surface Plate 18" x 24" x 4" Two Ledge (1 left) |
$95.00 |
 |
Granite Surface Plate 18" x 24" x 3-1/2", Two Ledge | $95.00 | |
 |
L712734 | Granite Surface Plate 24" x 36" x 4" |
$175.00 |
 |
Hardness Tester Table Elevating Screw |
$75.00 |
|
 |
Shore Lever Loader, Jamaica NY |
$95.00 |
|
 |
Brown & Sharpe No. 800 Divider | $19.00 | |
 |
3" Vernier Calipers x 1/32", Wood & Brass |
$25.00 |
|
 |
3" Vernier Brass Calipers |
$10.00 |
|
 |
Starrett 0-6" Dial Calipers 120-A | $95.00 | |
 |
Mitutoyo 0-7" Vernier Calipers, 1/1000 in. & 1/128th | $49.00 | |
 |
L8211 | Brown & Sharpe 12" Vernier Calipers |
$95.00 |
 |
 |
Mitutoyo 12" Dial Caliper | $95.00 |
 |
 |
Mitutoyo 12" Dial Caliper, Stainless Hardened, Made in Japan, Model 505-628 |
$85.00 |
 |
Shars 12" Dial Calipers |
$25.00 |
|
 |
 |
Mitutoyo 18" Vernier Caliper, 1/1000", Made in Japan |
$149.00 |
 |
 |
Kanon 24"/60CM Vernier Calipers, 1/1000", 1/50MM Made in Japan |
$175.00 |
 |
 |
Trademark 0-24"x 1/1000" Vernier Calipers, Made in China | Sold |
 |
MHC 24"/600MM Vernier Calipers Made in China |
$99.00 |
|
 |
Lufkin Micrometer Length Gage, Comes with 2 Mics. |
$79.00 |
|
 |
Photo | 250MM Vernier Height Gage |
$39.00 |
 |
Starrett 5" Vernier Height Gage No. 122 | Sold | |
 |
Helek 10" Height Gage, Made In Germany |
$49.00 |
|
 |
L81255 |
Starrett 12" Flush Reading Vernier Height Gage w/ Wood Box, .001" |
$249.00 |
 |
L8501 | Tumico 36" Vernier Height Gage |
$395.00 |
 |
 |
Mitutoyo 40" Electronic Height Gage without display, 507-240 |
$249.00 |
 |
Mitutoyo 12" Vernier Depth Gage |
$95.00 |
|
 |
Meyer Model M-O Plug Gages, .011" to .060, Minus .0002" | $39.00 | |
 |
SPI M0 Minus Class ZZ Pin Gages, Size .011" to .060, Accuracy .011" to .060", NIST Traceable, Registered ISO9001 | $59.00 |
|
 |
Pin Gages M-3 Minus .501-.625" | $75.00 | |
|
Machinist Jacks |
|||
|
Squares & Rules |
|||
 |
 |
Johnson No. 46 Rule/Caliper/Angle Gage, Made of German Silver |
$39.00 |
 |
L8155 | Starrett No. 55 Steel Square, 3-3/4" x 2-5/8" | $55.00 |
 |
Craftsman Machinist Square No. 40403, 4-3/4" x 2-7/8", Made in England |
$25.00 | |
 |
Starrett No. 55 Square, 3-3/4" x 5-1/2" | ||
 |
Starrett Metric Scale w/ 90 Degree Head, 1/2MM & MM, No. 35 Grad |
$39.00 |
|
 |
LS Starrett 6" Square, 4R, 1/8, 1/16, 1/32, 1/64 | $65.00 |
|
 |
 |
Starrett 12" Combination Square, 1/8", 1/16", 1/32", 1/64" Graduations |
Sold |
 |
 |
Starrett Combination Square w/ Metric Rule No 35 Grad, 300MM Long  |
$149.00 |
 |
 |
Mitutoyo 12" Combination Square, Blade 180-501A, 1/8, 1/16, 1/32, 1/64" Grads, Made in Japan | $125.00 |
 |
 |
Mitutoyo 24" /600MM Stainless Hardened Blade For Combination Set, Code No. 180-603, NOS | $75.00 |
 |
 |
Mitutoyo 24" Steel Rule No.182-161 |
$20.00 |
 |
 |
Blankenhorn 30 CM Rule, Square, Center Finder Made in Germany, 1.5 Pounds | $19.00 |
 |
 |
Blankenhorn 40 CM Rule, Square, Center Finder Made in Germany, 5 Pounds | $59.00 |
|
Straight Edges |
|||
 |
L9136G |
Rahn Granite Straight Edge, 2" x 36"
|
$275.00 |
  |
 |
Cast Iron Straight Edge, 3-3/4" x 5" x 43-5/8" Long, 169 Lbs.
 |
$395.00 |
|
Levels |
|||
 |
Starrett 6" Machinist Level | $75.00 | |
 |
 |
VIS 8" Master Precision Level, Made In Poland | $149.00 |
 |
L8915 |
Schultes 15" Master Precision Level, Plastic oiece on top has been broken but
the vials are in good shape. |
$149.00 |
 |
L930 | Acme Industrial 5" x 10" Bench Centers, Chicago IL, 20 Pounds | $149.00 |
 |
L930a | 5" x 12" Bench Centers, 23 Pounds | $149.00 |
 |
Federal 7" Swing x 8" Between Center w/ 4-1/2" x 6" Lapping Plate, 63 Lbs | $195.00 |
|
 |
 |
Federal 7" Swing x 8" Between Center w/ 4-1/2" x 6" Lapping Plate, 100B-20 | $249.00 |
 |
L9310 |
Stuhr 10" x 18" Bench Centers
 |
$195.00 |
 |
L93022 | Bench Center 8-3/4 x 12" | $149.00 |
 |
Science Bench Center No 1. Made In Japan 10-1/2 x 16" | $195.00 |
|
 |
 |
Standard Gage Company Dial Snap Gage 0-1", Indicator .0001" | $45.00 |
 |
Boice 1" Dial Snap Gage #2, .0001 Resolution D-81326 | $95.00 |
|
 |
L81150B | Starrett 1150-6 6" Dial Snap Gage | $195.00 |
 |
 |
Starrett 20" Beam Travel
No. 251 |
$49.00 |
 |
Light House Flash
Magnifier, 5X, Made in Japan |
$19.00 | |
 |
Starrett No. 18 B &
Craftsman Spring Loaded Center Punchses |
$29.00 for both | |
 |
General Ratchet Tap Wrench, No. 12-1/2", NO 162R Made in the USA | $19.00 | |
 |
Thread Measuring Wire Set, Made in Japan | $15.00 | |
 |
Starret No. 67 Scriber w/ Straight and Right Angle Tip | Sold | |
 |
Starrett 54C 6" Hold Down Pair | $49.00 | |
 |
Starrett 54C 6" Hold Down Pair | $39.00 | |
 |
Small Hole Gage Set, Made in Japan | $39.00 | |
 |
Starrett Small Hole Gage Set No. S831E, .125"-.500" | $59.00 | |
 |
Starrett No. S 229 F Set Of Three Telescoping Gage, 1/2" to 2-1/8" | $59.00 | |
 |
Starrett S579H Telescoping Gages, Missing A 5/16" to 1/2 & B 1/2 to 3/4" | $79.00 | |
 |
Starrett S579H
Telescoping Gages |
$99.00 | |
 |
A | Starrett 579 Telescoping
Gage, 3-7/16" to 6" |
$19.00 |
 |
Starrett 579-F Telescoping Gage, 3-7/16" to 6" | $25.00 | |
 |
 |
Brown & Sharpe 1/2" to 6"
Telescoping Gage Kit, Cat No. 590A |
$39.00 |
 |
Mitutoyo 6 Piece Telescoping Gage Set | $79.00 | |
 |
PII Telescoping Gages, Missing the C, Made in Japan | $39.00 | |
 |
A | Telescoping Gages, 5/16" to 6", Made in Japan | Sold |
 |
Illuminate Loupe (LED Light) 10X -25MM |
$15.00 |
|
 |
SPI Peak BR Flashlight Magnifier, Loupe, 10X 15/16" Lens, Manufacturer Part Number 06547665 |
$29.00 |
|
 |
Tool Setting Gage w/ Mitutoyo .0005" Dial Indicator No. 1507F |
$75.00 |
|
 |
Contour Gage |
$10.00 |
|
 |
Contour Gage |
$10.00 |
|
 |
Del-Tron Positioning Stage w/ Starrett Micrometers, X & Y Axis, .500" Travel, .001 Resolution, (1 Available) | $75.00 | |
 |
Lufkin No. 126 Thickness
Gage, .0015" to .025" |
$10.00 | |
 |
Starrett No. 66 Thicknesss Gage .26 Sheaves .0015 to .025", EDP 50314 | $35.00 | |
 |
Starrett No. 172A Thickness Gage, .0015, .004, .006, .008, .010, .012, .015 | $15.00 | |
 |
Starrett No. Thickness Gage, .0015, .003, .004, .005, .006, .008, .010, .012, .013, .015 | $16.00 | |
 |
Starrett No. 467
Thickness Gage, .004, .006, .008, .010, .020, .030, .040, .075, .100, .200" |
$19.00 | |
 |
Precision Brand 1/2" x 12" Feeler Gauge (4) .003, (3) .007, (8).008, (17).010, (2).011, (11).012" |
$29.00 |
|
 |
Lufkin 74C Thread Gage, Jan 27, 1925 | $9.95 | |
 |
Starrett No. 159M Metric Thread Pitch Gage 0.5mm -11.5mm | Sold | |
 |
Starrett No. 178A Radius Gage |
$19.00 |
|
 |
Starrett No. 178B Fillet
or Radius Gage |
$24.00 | |
 |
Mitutoyo 186-104 Radius Gage |
$25.00 |
|
 |
Starrett No. 178A Fillet or Radius Gage | Sold | |
 |
Starrett No. 272B Fillet or Radius Gage |
$19.00 |
|
 |
Starrett No. 272B Fillet or Radius Gage |
$25.00 |
|
 |
General NO. 435S Radius
Gage Set, Made in USA |
$19.00 | |
 |
Fugi L300 Radius Gage Set, 3/32"-1/2", Made In Japan |
$39.00 |
|
 |
Mitutoyo Radius Gage Set Code No. 186-901, Made In Japan |
$59.00 |
|
 |
Starrett S167D Stainless Steel Radius Gage Set, Missing Handle otherwise verry nice | $39.00 | |
 |
Starrett No. 564 Test Indicator w/ 360 Degree Rotatable Contact, +/- .010", Grad. .001" |
$25.00 |
|
 |
Starrett No. 359 Bevel
Protractor w/ 6" Blade |
$29.00 | |
 |
Helios Bevel Protractor
w/ 6" Blade, Made in Germany |
$39.00 | |
 |
Stainless Steel Protactor, Made in India | $6.00 | |
 |
Helios Stainless Steel
Protractor, 0-180 Degrees, Made in Germany |
$10.00 | |
 |
Craftsman Stainless Steel
Protractor, 0-180 Degrees, 9-4029, Made in USA |
$10.00 | |
 |
General 6" Stainless Steel Rule Metric/English Comparison Tool, 16th & 32nd Inch, Brand New, Many Available |
$1.95 |
|
 |
L8390 | Lufkin Planer Gage, No. 900 |
$39.00 |
 |
Lufkin Planer Gage w/ Wood Box, No. 900 | $49.00 | |
 |
Brown & Sharpe Planer Gage, No. 625 |
$49.00 |
|
 |
Starrett No. 56A Toolmakers Universal Surface Gage w/ 4" Spindle | $149.00 | |
 |
Surface Gage |
$25.00 |
|
 |
Surface Gage, Base 2-3/8" x 2-27/32" | Sold | |
 |
 |
Surface Gage, Starrett
12" Long Main Arm |
$39.00 |
 |
Surface Gage w/ Indicator Holder | Sold | |
 |
Swedish Gage Co. 3-6" Dial Bore Gage, Made In Eskilstuna, Sweden |
$75.00 |
|
 |
CC50HAMMER | Winchester Toolmakers Hammer w/ Built In Magnifying Glass, Made In China, Like Starrett 815 |
$10.95 |
|
Tachometers |
|||
 |
Revolution/Rotation Counter |
$29.00 |
|
 |
Jones Double Range Model 3200 Hand Tachometer w/ Stop Button Feature |
$95.00 |
|
 |
A | Millers Falls Co. Tachometer |
$19.95 |
 |
 |
Standco Model SE Feet Per Minute Counter, 0-15FPM |
$49.00 |
 |
Hanson 1/4" Figures Stamp Set, Well Used |
$10.00 |
|
 |
Carbide Tipped Hand Scraping Tools, 3 Available |
$10.00 Ea. |
|
 |
 |
Hand Scraping Tools | $49.00 |
 |
Pair of Unibits #10231 (13 Holes) 1/8"-1/2"(1/32" Increments), #10220 (8 Holes)
9/16"-1"(1/16" Increments) |
$49 .00 for the pair | |
 |
Lawson Products Aligning Reamer & Drill Kit No. 91894, Reamers 3/8", 1/2", 5/8", 3/4", Drill Bits 3/16", 1/4", 5/16", 3/8", Kit Lightly Used | $99.00 | |
 |
 |
Lawson Products Aligning Reamer & Drill Kit No. 91894, Reamers 3/8", 1/2", 5/8", 3/4", Drill Bits 3/16", 1/4", 5/16", 3/8", NOS | $149.00 |
 |
Japanese HSS Tap & Die Set |
$49.00 |
|
 |
21 Piece HSS Metric Tap & Die Set, 6mm-16mm |
$49.00 |
|
 |
Greenfield 2" x 14-1/2 NPT 7 Flute Tap, 4-1/2" OAL, Flute Length 1-7/8", Has some damaged teeth halfway up one flute |
$30.00 |
|
 |
Acme Tandem Tap, 5/8" - 8TPI Right Hand |
$49.00 |
|
 |
Acme Tandem Tap, 7/8" - 6 TPI Right Hand |
$75.00 |
|
 |
Acme Tandem Tap, 1" - 5 TPI Right Hand |
$95.00 |
|
 |
MA Ford Single Flute 82 Degree 4 Piece Countersink Set, 1/4", 1/2", 3/4", 1", 64100002 | $59.00 | |
 |
90 Degree 6 Piece Countersink Set |
$25.00 |
|
 |
Interstate 9/16" - 1" Reduced Shank Drill Bit Set, 118 Degree Point, Oxide Finish, Made In China, Used but not too much |
$49.00 |
|
 |
1/2" Shank Reduced Shank Drill Bit Set, 9/16"-1" x 1/16", Black Oxide Finish,
Made in China |
$29.00 | |
 |
 |
Huot Drill Index w/ USA Made HSS 1/2" Reduced Shank Drill Bit 9/16"-1" x 1/16", Shanks Have 3 Flats to Prevent Slipping | $95.00 |
 |
Enco Model A 7 Piece Forstner Bit Set, 300-0390, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1", Made in China |
$10.00 |
|
 |
Do-All Econo-Bore H.S. Steel D-25 Set, 1/4", 5/16", 3/8", 1/2", Screws, Missing No. 10 |
$75.00 |
|
 |
Lot of (22) Woodruff Keyway Cutters, I have not gone throught them all but the appear to be different sizes | $95.00 | |
 |
Woodruff Keyway Cutter Set, 304, 404, (2)406, 505, 605, (2)606, 607, 608, 609, 806, 807, 808, Various Manufacturers, Korea, US, Poland, Spain |
$95.00 |
|
 |
Import Broach Set, 1/16, 3/32, 1/8" |
$39.00 |
|
 |
L9940 | Broach Set, 5/16", 3/8", 7/16", 1/2" Broaches |
$250.00 |
 |
L9970 | Dumont Metric Broach Set, 4mm, 5mm 6mm, 8mm w/ Bushings, Made In the USA 8 Pounds |
$295.00 |
 |
L9980a | Dumont Metric Broach Set, 10mm, 12mm, 14mm w/ Bushings, Made In the USA 38 Pounds |
$395.00 |
 |
Dumont 1/8-A Key Way Broach & Shim, 22203, Made in the USA |
$25.00 |
|
 |
Dumont 3/16-C Keyway Broach |
$29.00 |
|
 |
Dumont 1/4"-C Keyway Broach |
$29.00 |
|
 |
Dumont 3/8"-C Keyway Broach |
$39.00 |
|
 |
Dumont 3/8-D Keyway Broach |
$49.00 |
|
 |
A | Dumont 3/8-D Keyway Broach |
$49.00 |
 |
Dumont 3/8"-C Keyway Broach w/ Shims 22211, Made in the USA |
$39.00 |
|
 |
 |
Dumont 1/2"-D Keyway Broach, 1 tooth has a chipped corner |
$29.00 |
 |
Dumont 1/2"-D Keyway Broach, 22216 | $39.00 | |
 |
Dumont 3MM-A Key Way Broach & Shim, 44402, Made in the USA |
$25.00 |
|
 |
Dumont 6MM-C Keyway Broach, 44406, Made In the USA |
$35.00 |
|
 |
Dumont 8MM-C Keyway Broach, 44407, Made In the USA |
$35.00 |
|
 |
Dumont 10MM-D-1 Keyway Broach |
$39.00 |
|
 |
Dumont 14MM Broach, Special Short Taper w/ Extra Shims |
$49.00 |
|
 |
Dumont 14MM-D-1 Keyway Broach |
$49.00 |
|
 |
Piranha Cutter, CO-RUFF-5160, SE-4FL M42 Cobalt Ruff, 5/16" TiALN, 2 Available |
$10.00 ea |
|
 |
Piranha Cutter, CO-RU38-RR45, SE-4FL M42 Cobalt RGHR, 5/16" TiALN, 2Available |
$12.00 ea |
|
 |
CV70CR143, 7/16" Dia. - 2-11/16"OAL - TiN M42 - Roughing SE EM - 4 FL, Made in Korea, NOS (List Price $26.35) 1 Available |
$15.00 ea. |
|
 |
Interstate 9/16" x 1/2" Shank, 4 Flute Length 1-3/8", Cobalt Roughing & Finishing Endmill, NOS #01859362, (List Price $57.22) |
$20.00 |
|
 |
CV70CR225 11/16" Dia. - 3-3/4" OAL - TiN M42 - Roughing SE EM - 4 FL , Made in Korea, NOS (List Price $42.00) 3 Available |
$26.00 ea |
|
 |
Detroit Industrial Tool 3/16" x 3/8" Shank, 4 Flute M2 HSS(TIALN) 3 Available |
$10.00 ea. |
|
 |
Detroit Industrial Tool 3/8" x Shank, 2 Flute M2 HSS(TIALN) 2 Available |
$12.00 ea. |
|
 |
Detroit Industrial Tool 1" x 3/4" Shank, 4 Flute M2 HSS(TIALN) 2 Available |
$25.00 ea |
|
 |
1" End Mill, 4 Flute, Single End, OAL 4-1/2", HSS, NOS 1 Available |
$15.00 ea |
|
 |
Tin Coated Carbide 82 Degree Countersinks, 3/8" Diameter, 2.530" OAL, (4 Available) |
$15.00 ea |
|
 |
GFS Trepanning Tool, For cutting bores & plunge cutting ring grooves, Morse Taper #4 Shank, CN Model w/ Centering Pin For Use On Drills, 160MM, Made In Germany |
$149.00 |
|
 |
Rigibore Micro Adjustable Boring Cartridge TR 5B 2 (NOS) (2 Available) |
$24.95 |
|
 |
5/8" Nobur Deburring Tool |
$24.95 |
Call (815)434-5897 or E-mail sales@lostcreekmachine.com
